<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Technicians, Engineers or students. Mainly used in industries such as Electronics manufacture plants, R & D laboratories, Electrical troubleshooting, schools, Calibration labs. </p>
CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of High Voltage, Utilities & Cabling test equipment suitable for Switchgear and transformer manufacturer/ installer, Heavy equipment manufacturer, Utilities & Construction industries.
<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Marine, Rigs, Offshore, Oil & Gas industries. </p>
Why use thermal camera in Electrical work? <br /><br />Infrared thermography is a test that can be utilised to identify unbalanced loads, poor connections, deteriorated insulation or any other issues in energized electrical panels or components without dismantling the components. <br /><br /><br /><br />
<p><span>Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. </span><span><br /><br /><span><span>With the current technology datalogger allows you to connect remotely especially with the current COVID-19 situation. It enables you to view your data conveniently from your Computer or mobile devices. </span></span><br /><br /><span><span>CE-Test & Measurement carries a wide range of Dataloggers. Monitor</span><span> temperature, humidity, weather, pressure, or even vibration and its suitable for all types of industries. industries such as, logistics, cold chain, hospital, and more. </span></span></span></p>
<p><br /><br /><br /></p>
Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed...
Power through transformer electromechanical tests with the new TTRU1, the latest handheld transformer turns ratiometer from Megger. Perform routine polarity validation and turn ratio tests on power, distribution, and...
MFT1741 multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise. It provides all the tests required to...
The SMART THUMP ST Series of cable fault locators provides safe, efficient and easy-to-use solution for quickly identifying, prelocating and pinpointing various types of cable faults for power cables. The ST Series...
The EGIL is an automatic timer and motion analyzer for medium- and high-voltage substation circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg for...
For basic requirements it provides digital ground testing and bond test capabilities.
Buy Online! CETM E-Stores for you to choose from!
Click on below to purchase
CETM E-STORE CETM LAZADA SHOP CETM SHOPEE SHOP
Test and diagnostics system for medium voltage cables
The VLF sine wave 62 kV with integrated tan delta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables.
Network operators can now get faster and significantly more reliable information about the quality and the condition of their cables. This is made possible thanks to the brand-new 50 Hz Slope Technology. For the first...
Weighing as little as 32 kg the EZ-Thump 3 kV is the first of its kind in the market and with updated EZ-Thump 4 kV this series are the most portable fault location systems specifically for shielded and unshielded low...
The BVM is designed in modular form where one BVM device is used for each battery or “jar” in the string to be tested. One BVM for each battery connects to the next in a “daisy-chain” fashion, thereby providing easy...
The SMRT410D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid state and microprocessor-based protective relays, motor overload relays, and similar...
The Megger MLM50 Laser Distance Meter is a compact, simple to use, laser distance measuring device. It is housed in a shock absorbent IP54 rated protective case and incorporates soft-touch, sure-click buttons. With a...
With the PD Scan, Megger offers a lightweight, robust and portable PD scanner that can quickly inspect various type of equipment for partial discharge signals.
Click Here For Video
This item is not available for...
The MTO 300 series delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time for the user by testing all normal 6 windings without having to disconnect and reconnect leads...
The PAT100 series of hand-held portable appliance testers enable simple, fast safety testing in all environments including offices, shops and business units. It is ideally suited to training organisations, easy to...
Engineer’s ultimate toolbox that addresses the increasing need for three-phase testing capability in electrical distribution substations, renewable power generation stations and industrial applications.
This item is...
The MFT1741+ includes an automatic EV Charge Point RCD test sequence, including the 6 mA dc test*. Test results can be reviewed or saved to memory and reviewed later.
The Surge Wave Generator SWG 500 operates in the middle voltage range of the usual SWGs. While its surge energy is in the lower range, the three voltage ranges are switchable, which allows each voltage stage to use...
These high-current supply units have two main fields of application.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
Portable LV Cable Fault Location System
The M-Thump5 Portable Cable Fault Locating System provides safe, efficient, and extremely easy-to-use solutions for quickly identifying, pre-locating, and pinpointing various...
Get fast, accurate, repeatable measurements - even in noisy environments - with the DLRO2 hand-held 2 A low resistance ohmmeter.
Click Here To Watch Video
For customers who need more power and functionality with fault locating, Megger offers the Surgeflex25-1150 M. These systems are designed for the more frequent and experienced users. They offer the benefits of...
The MJÖLNER Series is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links.
This item is not available for online purchase. Please...
This versatile instrument can provide test currents from 10 amps up to 200 amps subject to the load resistance and supply voltage. A large LCD displays all all test parameters and measurement results.
This item is...
The ADX family includes models designed to perform tests up to 15 kV. The five main options include 4 kV, 6 kV, 12 kV, 15 kV, and 15 kV-A (Armature). These analyzers can be coupled with PPX to increase test voltages...
Centrix 2.0 is the world’s most modern and powerful cable test van system for fast, easy and non-destructive fault location up to 33 kV.
Click Here For Video
This item is not available for online purchase. Please...
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit. Possessing a measuring range up to 25,000 feet, the EZ-RESTORE OVERDRIVE...
The Baker DX series can apply a wide set of off-line electrical tests to assess the condition of motors and coils.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
Megger’s automatic portable oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids.
This item is not available for sale online. Please contact 62925161 or...
The DCM305E is perfect for identifying and measuring the earth leakage current in a circuit where the RCD keeps tripping out unexpectedly. The measured result will quickly identify whether the earth leakage current...
Online PD monitoring on rotating machines, transformers, cables, and especially GIS systems. It combines proven technology of the ICMmonitor with new processor technology and embedded hardware capabilities. The...
The FRAX series of sweep frequency response analyzers (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect.
This item is not available for sale online. Please contact...
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
The DET2/3 is a robust and compact automatic earth (ground) test instrument designed to measure earth electrode resistance and soil resistivity. For use on large or more complex earth systems, which include...
The SPI225 is a high current primary injection test system for all forms of high current testing required in a substation, including testing overcurrent relays, circuit breakers, motor overloads, and current...
Measuring up to 2000 V DC and 1500 V AC (using the PVHV Leads), as well as 1500A AC or DC, the DCM1500S is ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well...
Is it possible to know in advance when a power failure will happen?
Can you reduce outage times to a minimum?
And: can you locate cable faults at all without disconnecting the consumer from the mains?
YES, Megger can....
The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years’ experience of over 4,000 delivered breaker analysers. The modular construction makes it possible to configure the...
Offering CAT IV, the MIT515 is the simplest of Megger's new range of small light 5 kV insulation resistance testers for the testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is...
The kit for the Megger MCT105 cable locator includes a separate transmitter and receiver. The instrument is designed to help detect and trace cables or metallic conductors in walls or buried underground and can locate...
Fault location systems have to meet steep re-quirements to be considered truly portable and thus outdoor-ready for use in the field. Units must be lightweight, rugged, inured to hostile...
In many situations, conventional fault location is impossible, for example when the electrical supply cannot be disconnected or the necessary fault location system is temporarily unavailable.
This is where the...
The risk of overheating is becoming more serious due to the fact that today's distribution networks have to carry heavier loads. Checking contact resistances at regular intervals detects faults before they cause...
Discharge testing is the only test method that provides a comprehensive insight into battery capacity, and is therefore an essential part of vigorous battery maintenance programmes.
This item is not available for...
The new EVCC300 introduces a new and convenient way of checking Electric Vehicle charge points. A simple all in one concept provides an easy to use solution to check both the safety and operation of mode 2 and single...
The UHF PD Detector is the ideal tool for quick, non-invasive surveys in MV and HV substations and should be part of the toolkit for all maintenance and service teams. Due to its high measurement bandwidth, the UHF...
The MTO210 transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. It can test transformers and...
NetEP is a permanently-installed, fully automated machine system monitoring solution. It continuously acquires health and performance data on electric motors and the rotating machine systems they operate. With the...
MOM2 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind.
This item is not...
The Megger MET1000 is a multifunctional voltage and current tester providing electricians and electrical engineers with a versatile and robust hand-held all in one meter, with detachable test leads. Featuring both LED...
Power Diagnostix ICMcompact provides a simple push-button interface and on-screen menus in an embedded LCD panel. The LCD display modes include a simple PD charge meter with adjustable “needle” sensitivity, monochrome...
The SVERKER750 and SVERKER780 Relay Test Set are the engineer's toolbox. The control panel features a logical layout, SVERKER 650 users will find it comfortably familiar and will be able to start work right away.
This...
Developed, after extensive customer research, specifically to meet the needs of today’s electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to...
The AVO®215 is a pocket sized multimeter that offers a wide range of functions in a small, rugged package. The 4000 count high contrast negative display, combined with a back light, provides the user easy to read...
Save time and money with the Fault Sniffer 2! You can locate cable faults quickly and reliably, without the need for service providers or a cable test van.
Its intelligent, two-sensor technology also detects natural...
Surgeflex 32 is a mobile system for testing and fault locating on low and medium voltage cables. The powerful ARM (Arc ReflectionMethod) is used for prelocation of high resistance faults up to 32 kV. Should...
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test system. Testing relays with SVERKER 650 also requires an extra timer if more than one timing cycle is to be...
MOM200A is ideal for finding poor connections since it can put out 100 A for extended periods. Its range extending up to 20 milliohms makes it ideal for measuring many different types of connections.
This item is...
The system has an impulse transmitter that uses a inductive coupler to inject a signal into the cable.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry
With new developments in cable fault location and pinpointing, SebaKMT is continuously striving to offer customers time-saving and cost-effective solutions.
This item is not available for online purchase. Please...
Megger Baker Instruments designs and manufactures electric motor test systems for original equipment manufacturers (OEMs) that help ensure their motors and coils meet or exceed the quality expectations OEMs wish to...
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
The SMART THUMP ST16-20 Portable/Vehicle-mounted Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable...
GISmonitor Portable is for temporary monitoring of partial discharge activity on gas-insulated switchgear.
PD measurements can be easily applied on GIS systems without the need of interrupting the operation. Such...
IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that in an...
2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing...
Megger MVCT test set is a lightweight, robust, portable unit capable of testing both current and voltage transformers.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
The FCC3450 3000 A flexible clamp meter is a Bluetooth® enabled flexible current clamp, designed for AC/DC voltage, frequency, continuity, and resistance measurements, as well as AC current up to 3000 A. It measures...
The Megger VF5 Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder, plus vibration alert. The detector...
The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems.
This item is not available for online purchase....
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg...
Offering CAT IV, the MIT525 is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. It is both smaller and lighter than its predecessor,...
The SMRT1D incorporates the latest in digital signal processing and microprocessor-based technology to provide the most advanced yet, easy to use, single-phase relay test system on the market today. The SMRT1D is...
The NEW Megger TTRU3 transformer turns ratiometer uses a revolutionary design to perform a complete series of measurements on a transformer, including 3Ø step up turns ratio testing (patent pending). 3Ø voltage output...