Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed...
The all-new Durabook S14I features the latest 11th Generation Intel® CPUs and class-leading 4′ drop spec/IP53 rating, pushing semi-rugged devices to a whole new level. The S14I is engineered to combine military-grade...
Powered by Intel® 12th Generation processors, Durabook S15 offers the perfect blend of best-in-class performance, mobility and reliability, compared to commercial rugged laptop competitors. Featuring a 15.6” Full HD...
Built for All. All in One.
Choosing between mutually exclusive I/O interfaces and devices is a thing of the past. The Durabook U11I rugged tablet has it all. Within its extremely compact and rugged exterior, the U11I...
Combining the mobility and flexibility of its pocketable form with a business-focused design, the R8 fully rugged tablet offers a unique combination of revolutionary computing power, rugged features and high...
As Strong As It Gets. Boundless Customization.
The Z14I includes Durabook’s proprietary DynaVue® technology and high-definition multi-touch screen, offering the highest contrast ratio, which helps to eliminate...
Every inch and detail of the Durabook R11 rugged tablet is designed to maximize the efficiency of professional field workers. The Durabook R11 is only 20mm (0.78″) in height and weighs just 1.2kg (2.7lb), making it...
Portable LV Cable Fault Location System
The M-Thump5 Portable Cable Fault Locating System provides safe, efficient, and extremely easy-to-use solutions for quickly identifying, pre-locating, and pinpointing various...
Save time and money with the Fault Sniffer 2! You can locate cable faults quickly and reliably, without the need for service providers or a cable test van.
Its intelligent, two-sensor technology also detects natural...
Surgeflex 32 is a mobile system for testing and fault locating on low and medium voltage cables. The powerful ARM (Arc ReflectionMethod) is used for prelocation of high resistance faults up to 32 kV. Should...
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test system. Testing relays with SVERKER 650 also requires an extra timer if more than one timing cycle is to be...
MOM200A is ideal for finding poor connections since it can put out 100 A for extended periods. Its range extending up to 20 milliohms makes it ideal for measuring many different types of connections.
This item is...
The system has an impulse transmitter that uses a inductive coupler to inject a signal into the cable.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry
With new developments in cable fault location and pinpointing, SebaKMT is continuously striving to offer customers time-saving and cost-effective solutions.
This item is not available for online purchase. Please...
Megger Baker Instruments designs and manufactures electric motor test systems for original equipment manufacturers (OEMs) that help ensure their motors and coils meet or exceed the quality expectations OEMs wish to...
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
The SMART THUMP ST16-20 Portable/Vehicle-mounted Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable...
GISmonitor Portable is for temporary monitoring of partial discharge activity on gas-insulated switchgear.
PD measurements can be easily applied on GIS systems without the need of interrupting the operation. Such...
IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that in an...
2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing...
Megger MVCT test set is a lightweight, robust, portable unit capable of testing both current and voltage transformers.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
The SPI225 is a high current primary injection test system for all forms of high current testing required in a substation, including testing overcurrent relays, circuit breakers, motor overloads, and current...
The Megger VF5 Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder, plus vibration alert. The detector...
The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems.
This item is not available for online purchase....
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg...
Offering CAT IV, the MIT525 is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. It is both smaller and lighter than its predecessor,...
The PMM-2 is designed to perform fast, accurate checking and testing of protective relay and meter installations during their commissioning and in routine maintenance.
The NEW Megger TTRU3 transformer turns ratiometer uses a revolutionary design to perform a complete series of measurements on a transformer, including 3Ø step up turns ratio testing (patent pending). 3Ø voltage output...
HVB10 is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables.
This item is not available for...
MOM690™ supplements our family of microhmmeters. In addition to high current capacity, MOM690™ features microprocessor-based measurement, storage and reporting. The built-in software enables you to carry out an...
The Megger AVO®410 digital multimeter designed for the contracting electrician has the additional features that also make the instrument suitable for wide range of applications and users.
Buy Online! CETM E-Stores for...
The system structure of the City Series offers new and unique capabilities of cable fault location, VLF testing and partial discharge diagnostics.
This item is not available for online purchase. Please contact...
The MTO106 transformer ohmmeter is an easy-to-use, line-operated instrument specifically designed for safe and accurate field measurement of winding resistance in smaller transmission and distribution transformers. It...
he PAT300 series will carry out all test requirements automatically with one button press.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry.
TRAX is a multi-functional solution for transformer testing. It also adds several common substation testing functionalities, and ultimately replaces numerous individual testing devices.
This item is not available for...
The Megger TPT420 voltage tester is designed to provide electricians and electrical engineers with an easy to use voltage indicating instrument. The meter will continue to warn the operator of dangerous test voltages...
ICMsystem is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is usable over a range of frequencies of applied voltage, including power system frequency (50/60 Hz) and VLF (0.1 Hz).
The Sverker 650 testing unit, whose design incorporates benefits gleaned from many years of experience in field relay testing, enjoys a well-earned reputation for reliability and convenience.
This item is not...
Offering CAT IV, the MIT1025 is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and...
The AVO®215 is a pocket sized multimeter that offers a wide range of functions in a small, rugged package. The 4000 count high contrast negative display, combined with a back light, provides the user easy to read...
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
The SFX8-1000 and SFX5-1000 are a mobile, and economical fault locating systems, specially suited for the fault location in low voltage but also in medium voltage systems, for lighting system, pilot cables and for...
When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation.
This...
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations...
The BITE5 is a battery tester that will test lead acid batteries, NiCD batteries as well as lithium-ion batteries. The BITE5 will measure and record battery voltage, impedance, and temperature. The BITE5 also supports...
The HV DAC series is designed for after-laying testing on newly installed HV-cables as part of quality control, and for condition assessment on repaired or service-aged HV-cables.
Click Here For Video
This item is...
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit.
This item is not available for online purchase. Please contact 62925161...
Megger® TDR2000/3, TDR2010 and TDR2050 are state of the art, dual channel, high resolution, compact Time Domain Reflectometers with a colour screen for locating faults on paired metallic cables.
All TDRs in this...
The patented DualGround™ testing using the DCM module makes the testing safe and time saving by keeping the circuit breaker grounded on both sides throughout the test. The DCM module uses a measuring technology called...
The SMART THUMP ST25-30 Portable/Vehicle-mounted Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable...
ICMmonitor is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is a compact, stand-alone instrument for evaluating the condition of medium and high voltage insulation. A built-in...
VAX020 expands the IDAX300 test voltage range from 200 V to 2 kV. This improves the capability to perform accurate measurements in extreme high interference environments e.g. HVDC substations.
This item is not...
Megger MWA300 and 330A Transformer Winding Analysers are here to offer you a faster, more efficient testing device through combining TTR and resistance testing in a single unit.
This item is not available for sale...
The FCC3450 3000 A flexible clamp meter is a Bluetooth® enabled flexible current clamp, designed for AC/DC voltage, frequency, continuity, and resistance measurements, as well as AC current up to 3000 A. It measures...
The Megger VF6 EX Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder plus vibration alert. The...
Surge wave generators are, like reflectometers, an essential component of the cable fault location process. They are used for both prelocation and pinpointing.
This item is not available for online purchase. Please...
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that...
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
The SMRT1D incorporates the latest in digital signal processing and microprocessor-based technology to provide the most advanced yet, easy to use, single-phase relay test system on the market today. The SMRT1D is...
The Megger TC3231 offers a professional infrared 32 x 31 pixels image thermometer with a 2.2 inch (55.88 mm) colour TFT LCD display
Click Here To Watch Video
The PFL Series of cable fault locators provide a versatile, portable solution for advanced identification, prelocation, and pinpointing of cable faults on a wide variety of cable types.
This item is not available for...
The DLRO-H200 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind. This...
Over 20 years experience has led to the development of the Megger KF875 and KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site. The KF875...
The Megger PVM210 provides the solar / photovoltaic engineer a compact, pocket size instrument that is easy to use.
Single handed operation is possible because the solar detector and meter being housed in one neat...
With its standard 110 kV/290 mA DC testing, up to 50 kV ARM prelocation and 3 kV to 50 kV surging with up to 2500 J, the R 30 System covers all requirements in the range of low voltage up to high voltage without any...
The MTO250 Transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the resistance of all types of magnetic windings safely and accurately. It tests transformers, shunt...
Three new PAT testers with full database functionality based on the well received PAT300 series. The PAT 400 series introduces a new level of convenience and speed to PAT testing using onboard test results.
This item...
Megger Ducter™ DLRO100 enables low resistance measurement, across multiple applications, in areas without access to mains power. The integral Li-ion battery supplies a constant 100 A current for up to 200 automatic or...
The instrument is fitted with a battery pack for independent operation up to 3 hours and adapts to a variety of piezo-electric acoustic sensors and is supplied with a versatile sensor fixture. Additionally, the...
The current input range can be extended by using external current transformers.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
The Baker EXP4000 is a powerful tool, designed for site use, to analyse the motor running under its normal load. It tracks multiple data types to identify trends that indicate potential problems. Voltage and current...