<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Technicians, Engineers or students. Mainly used in industries such as Electronics manufacture plants, R & D laboratories, Electrical troubleshooting, schools, Calibration labs. </p>
CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of High Voltage, Utilities & Cabling test equipment suitable for Switchgear and transformer manufacturer/ installer, Heavy equipment manufacturer, Utilities & Construction industries.
<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Marine, Rigs, Offshore, Oil & Gas industries. </p>
Why use thermal camera in Electrical work? <br /><br />Infrared thermography is a test that can be utilised to identify unbalanced loads, poor connections, deteriorated insulation or any other issues in energized electrical panels or components without dismantling the components. <br /><br /><br /><br />
<p><span>Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. </span><span><br /><br /><span><span>With the current technology datalogger allows you to connect remotely especially with the current COVID-19 situation. It enables you to view your data conveniently from your Computer or mobile devices. </span></span><br /><br /><span><span>CE-Test & Measurement carries a wide range of Dataloggers. Monitor</span><span> temperature, humidity, weather, pressure, or even vibration and its suitable for all types of industries. industries such as, logistics, cold chain, hospital, and more. </span></span></span></p>
<p><br /><br /><br /></p>
The CM3289 is a True RMS rectifying 1000A AC clamp meter that features a broad operating temperature range of -25° C to 65° C, thin and compact clamp core and optional flexible current sensor that you can attach to...
The system has an impulse transmitter that uses a inductive coupler to inject a signal into the cable.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry
With new developments in cable fault location and pinpointing, SebaKMT is continuously striving to offer customers time-saving and cost-effective solutions.
This item is not available for online purchase. Please...
Megger Baker Instruments designs and manufactures electric motor test systems for original equipment manufacturers (OEMs) that help ensure their motors and coils meet or exceed the quality expectations OEMs wish to...
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
The SMART THUMP ST16-20 Portable/Vehicle-mounted Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable...
GISmonitor Portable is for temporary monitoring of partial discharge activity on gas-insulated switchgear.
PD measurements can be easily applied on GIS systems without the need of interrupting the operation. Such...
IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that in an...
2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing...
Megger MVCT test set is a lightweight, robust, portable unit capable of testing both current and voltage transformers.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
The FCC3450 3000 A flexible clamp meter is a Bluetooth® enabled flexible current clamp, designed for AC/DC voltage, frequency, continuity, and resistance measurements, as well as AC current up to 3000 A. It measures...
The Megger VF5 Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder, plus vibration alert. The detector...
The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems.
This item is not available for online purchase....
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg...
Offering CAT IV, the MIT525 is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. It is both smaller and lighter than its predecessor,...
The SMRT1D incorporates the latest in digital signal processing and microprocessor-based technology to provide the most advanced yet, easy to use, single-phase relay test system on the market today. The SMRT1D is...
The NEW Megger TTRU3 transformer turns ratiometer uses a revolutionary design to perform a complete series of measurements on a transformer, including 3Ø step up turns ratio testing (patent pending). 3Ø voltage output...
HVB10 is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables.
This item is not available for...
MOM690™ supplements our family of microhmmeters. In addition to high current capacity, MOM690™ features microprocessor-based measurement, storage and reporting. The built-in software enables you to carry out an...
The Megger AVO®410 digital multimeter designed for the contracting electrician has the additional features that also make the instrument suitable for wide range of applications and users.
Buy Online! CETM E-Stores for...
The system structure of the City Series offers new and unique capabilities of cable fault location, VLF testing and partial discharge diagnostics.
This item is not available for online purchase. Please contact...
The MTO106 transformer ohmmeter is an easy-to-use, line-operated instrument specifically designed for safe and accurate field measurement of winding resistance in smaller transmission and distribution transformers. It...
he PAT300 series will carry out all test requirements automatically with one button press.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry.
TRAX is a multi-functional solution for transformer testing. It also adds several common substation testing functionalities, and ultimately replaces numerous individual testing devices.
This item is not available for...
The Megger TPT420 voltage tester is designed to provide electricians and electrical engineers with an easy to use voltage indicating instrument. The meter will continue to warn the operator of dangerous test voltages...
ICMsystem is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is usable over a range of frequencies of applied voltage, including power system frequency (50/60 Hz) and VLF (0.1 Hz).
The Sverker 650 testing unit, whose design incorporates benefits gleaned from many years of experience in field relay testing, enjoys a well-earned reputation for reliability and convenience.
This item is not...
Offering CAT IV, the MIT1025 is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and...
The IMT100 is a versatile hand held multi testing instrument with dedicated four wire insulation resistance, and four wire Kelvin low resistance features ideal for comprehensive industrial applications. The IMT100...
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
The SFX8-1000 and SFX5-1000 are a mobile, and economical fault locating systems, specially suited for the fault location in low voltage but also in medium voltage systems, for lighting system, pilot cables and for...
When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation.
This...
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations...
The BITE5 is a battery tester that will test lead acid batteries, NiCD batteries as well as lithium-ion batteries. The BITE5 will measure and record battery voltage, impedance, and temperature. The BITE5 also supports...
The HV DAC series is designed for after-laying testing on newly installed HV-cables as part of quality control, and for condition assessment on repaired or service-aged HV-cables.
Click Here For Video
This item is...
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit.
This item is not available for online purchase. Please contact 62925161...