<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Technicians, Engineers or students. Mainly used in industries such as Electronics manufacture plants, R & D laboratories, Electrical troubleshooting, schools, Calibration labs. </p>
CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of High Voltage, Utilities & Cabling test equipment suitable for Switchgear and transformer manufacturer/ installer, Heavy equipment manufacturer, Utilities & Construction industries.
<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Marine, Rigs, Offshore, Oil & Gas industries. </p>
Why use thermal camera in Electrical work? <br /><br />Infrared thermography is a test that can be utilised to identify unbalanced loads, poor connections, deteriorated insulation or any other issues in energized electrical panels or components without dismantling the components. <br /><br /><br /><br />
<p><span>Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. </span><span><br /><br /><span><span>With the current technology datalogger allows you to connect remotely especially with the current COVID-19 situation. It enables you to view your data conveniently from your Computer or mobile devices. </span></span><br /><br /><span><span>CE-Test & Measurement carries a wide range of Dataloggers. Monitor</span><span> temperature, humidity, weather, pressure, or even vibration and its suitable for all types of industries. industries such as, logistics, cold chain, hospital, and more. </span></span></span></p>
<p><br /><br /><br /></p>
Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed...
E2670 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Methane detector-transmitter...
Refrigerant detector E2610-HFC is a compact, easy in installation and maintenance device for indoor use. The instrument utilises a fully calibrated metal-oxide semiconductor gas sensor with excellent repeatability,...
E2670 series is a new line of flameproof detectors-transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Solvent vapors transmitter E2670-VOC is...
Methane detector-transmitter E2638-CH4 is a member of new PluraSens® family of multifunctional measurement instruments. Applications include underground parkings, boiler houses, kitchens, and other areas, where...
E2670 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Combustible gas detector-transmitter...
E7718 controller operates as 1-wire master device, performing µLAN network analysis and regularly polling for data from 1-wire sensors. The instrument implements dynamic register assignment for sensors data, allowing...
MHO High Resolution Oscilloscope 3 Series has 500MHz bandwidth, 3GSa/s sampling rate, 4 analog channels, 360Mpts memory depth and 12 bits vertical resolution; 3.58cm ultra-thin body support wall /arm mounting;...
TO series Tablet Oscilloscope features 2&4 analog channels, up to 300MHz bandwidth, 2GSa/s sampling rate and max. 220Mpts memory depth, running with Micsig latest SigtestUITM multitasking system, make sure...
The infrared thermometer optris CSlaser G5 HF has been specifically designed for temperature measurement of flat glass, container glass, lightbulbs, vehicle glass, and solar cells.
The pyrometer optris CThot LT has been developed for the most extreme conditions in high-temperature areas and is acclaimed for its especially high temperature resistance. Employment of the inrared thermometer in...
The thermal imager optris PI 640 is the smallest measuring VGA infrared camera worldwide. With an optical resolution of 640x480 pixels, the PI 640 delivers pin-sharp radiometric pictures and videos in real time.
Due to its special spectral region of 7.9 µm, the innovative pyrometer optris CT P7 is perfectly suited for temperature measurements of thin plastic materials like PET, PU, PTFE, PA or CTA.
The small infrared measuring head is perfectly suited for installation in very limited spaces and allows for an especially cost-efficient mechanical process integration.
Microscope optics for the inspection of electronic boards and tiny components The newly developed Microscope lenses are especially designed for thermal inspection of electronic boards and analyses of small chip level...
The infrared thermometer optris CTlaser LT allows for exact temperature measurement on smallest objects from 0,9 mm at a distance of 70 mm. The IR thermometer optris CTlaser LTF is due to its short configuration time...
Due to their short measuring wavelength and the high temperature range of up to 2,200°C the pyrometers optris CT 1M and 2M are ideally suited for employment in high-temperature measurements of metals, metal oxides,...
The infrared thermometer optris CSlaser LT consists of a robust stainless steel sensor with integrated electronics, enabling easy integration into your system.
The small infrared measuring head is optimally suited for installation in limited spaces and subsequently makes possible an especially cost-efficient mechanical process integration.
A full 80x80 thermal image eliminates the hunt for the hot spot and tedious positioning required with single spot temperature sensors. The integrated spot finder function will identify the hottest (or coldest) spot in...
Due to its short measuring wavelength and a temperature range from 50°C on, the pyrometer optris CT 3M, is ideally suited for employment in low-temperature measurements of metals and composite materials. The quick...
The newly developed thermal camera optris PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at...
The infrared thermometer optris CSlaser hs LT allows for measuring of the slightest temperature differences from 0.025°C on, which plays an important role for e.g. continual surveillance of product homogeneities.