<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Technicians, Engineers or students. Mainly used in industries such as Electronics manufacture plants, R & D laboratories, Electrical troubleshooting, schools, Calibration labs. </p>
CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of High Voltage, Utilities & Cabling test equipment suitable for Switchgear and transformer manufacturer/ installer, Heavy equipment manufacturer, Utilities & Construction industries.
<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Marine, Rigs, Offshore, Oil & Gas industries. </p>
Why use thermal camera in Electrical work? <br /><br />Infrared thermography is a test that can be utilised to identify unbalanced loads, poor connections, deteriorated insulation or any other issues in energized electrical panels or components without dismantling the components. <br /><br /><br /><br />
<p><span>Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. </span><span><br /><br /><span><span>With the current technology datalogger allows you to connect remotely especially with the current COVID-19 situation. It enables you to view your data conveniently from your Computer or mobile devices. </span></span><br /><br /><span><span>CE-Test & Measurement carries a wide range of Dataloggers. Monitor</span><span> temperature, humidity, weather, pressure, or even vibration and its suitable for all types of industries. industries such as, logistics, cold chain, hospital, and more. </span></span></span></p>
<p><br /><br /><br /></p>
Our new clamp meters have the thin jaw which can measure the cables in the narrow space, such as crowded combiner boxes. Waterproof rating IP54 can against dust that may harm clamp meters and against water splashed...
E2670 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Combustible gas detector-transmitter...
E7718 controller operates as 1-wire master device, performing µLAN network analysis and regularly polling for data from 1-wire sensors. The instrument implements dynamic register assignment for sensors data, allowing...
E2670 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Methane detector-transmitter...
Refrigerant detector E2610-HFC is a compact, easy in installation and maintenance device for indoor use. The instrument utilises a fully calibrated metal-oxide semiconductor gas sensor with excellent repeatability,...
E2670 series is a new line of flameproof detectors-transmitters intended for use in ATEX Zones 2 and 22. E2670 series devices are based on PluraSens® multifunctional platform. Solvent vapors transmitter E2670-VOC is...
Methane detector-transmitter E2638-CH4 is a member of new PluraSens® family of multifunctional measurement instruments. Applications include underground parkings, boiler houses, kitchens, and other areas, where...
The PSH-Series are single output from 360 to 1080W, programmable switching DC power supplies. OVP, OCP, and OTP protect the power supply and loads from unexpected conditions. Remote sensing adds an extra level of...
GDS-2000A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSa/s maximum real-time sampling rate...
The PFR-100 series, a small and high-performance programmable D.C. power supply, adopts natural convection design to dissipate heat. The fanless structure allows users to focus on their experiments and tests in a...
GFG-8200A product family offers a complete solution in generating signals at the 3MHz/5MHz ranges. All models are embedded with standard functions such as TTL/CMOS/Ramp output, External Voltage Controlled Frequency...
The GPC-Series is triple output, 375W, linear DC power supplies. Channel 1 and 2 are fully adjustable (model dependant) and Channel 3 is fixed at 5V/3A with ripple and noise at less than 2mVrms. Overload and reverse...
The SFG-1000 Series, an economic function generator with high accuracy and high stability output, are designed based on the DDS (Direct Digital Synthesized) technology embedded in a large scale FPGA.
The 3MHz...
GDS-1000B series features three bandwidth selections ─ 100 MHz, 70 MHz, 50MHz and equips with analog signal input terminals by four or two channels ( 50MHz only equipped 4 channels input ). The maximum sampling rate...
The PPT Series are 3-channel, programmable linear DC power supplies with 138/126W outputs. The PPT Series feature OVP and OCP protection and are compliant with all major safety standards (UL, CSA, and IEC) for safe,...
The GDS-1000A-U series provides a unique solution. The GDS-1000A-U lineup includes GDS-1152A-U, GDS-1102A-U and GDS-1072A-U three models. Operating at 150, 100 or 70 MHz with a real-time sampling rate of 1GSa/s, the...
The PSB-2000 series, which is a high power density, programmable and multi-range output DC power supply. There are six models in the series including one power booster unit. The PSB-2000 series has the output voltage...
The GDB-03 training kit allows you to learn both the basic and the advanced functions of the GDS-3000 Series Digital Storage Oscilloscope (DSO). Following the training procedures of this training kit, you will quickly...
GW Instek launches the APS-7000E series the economy version of the APS-7000 programmable AC power source. With the height of 2U, the maximum rated output for APS-7050E is 500VA, 310Vrms, 4.2Arms and APS-7100E is...