<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Technicians, Engineers or students. Mainly used in industries such as Electronics manufacture plants, R & D laboratories, Electrical troubleshooting, schools, Calibration labs. </p>
CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of High Voltage, Utilities & Cabling test equipment suitable for Switchgear and transformer manufacturer/ installer, Heavy equipment manufacturer, Utilities & Construction industries.
<p>CE-Test & Measurement (S) Pte Ltd (CETM) carries a wide range of test equipment suitable for Marine, Rigs, Offshore, Oil & Gas industries. </p>
Why use thermal camera in Electrical work? <br /><br />Infrared thermography is a test that can be utilised to identify unbalanced loads, poor connections, deteriorated insulation or any other issues in energized electrical panels or components without dismantling the components. <br /><br /><br /><br />
<p><span>Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. </span><span><br /><br /><span><span>With the current technology datalogger allows you to connect remotely especially with the current COVID-19 situation. It enables you to view your data conveniently from your Computer or mobile devices. </span></span><br /><br /><span><span>CE-Test & Measurement carries a wide range of Dataloggers. Monitor</span><span> temperature, humidity, weather, pressure, or even vibration and its suitable for all types of industries. industries such as, logistics, cold chain, hospital, and more. </span></span></span></p>
<p><br /><br /><br /></p>
The Model 2000 SP is a low cost, high accuracy alternative to Relative Humidity calibrations that use chilled mirror or 2-pressure systems, and is faster than procedures using saturated salts. The system incorporates...
The Model 4000 EXP is a vertical Temperature and Humidity generator that supports large calibration equipment. This unit comes with a temperature-controlled door, which will maintain internal temperature unchanged due...
The Hygro-Mini Portable Humidity Generator/Calibrator is the smallest unit available with variable control for both humidity and temperature. This unit was designed for field calibration.
The Model 2000 SHR is a ruggedized, lightweight, highly accurate, portable humidity calibrator. Designed for extended field use in a wide range of environments.
Hygro Max is the newest addition to the 4000 Series. With a specially designed Carbon Fiber chamber to minimize the gassing effect, and it’s unique heat sink design for better heat dissipation. This unit is perfect...
Hygro-Mini X Portable Humidity Generator/Calibrator is the smallest unit available with variable control for both humidity and temperature. This unit was designed for field calibration.
The Model 2015-TS is a lightweight, highly accurate, portable humidity calibrator featuring a large, user friendly touch screen, and advanced electronics and connections.
The Model 1000 SP Benchtop Humidity Generator operates through use of a multifunction CPU in conjunction with other peripheral cards to perform calculation and control functions. A computer may be connected via the...
The Model 2500 CM is a ruggedized, lightweight, highly accurate, portable humidity calibrator. Designed for extended field use in a wide range of environments.
Due to its special spectral range of 3.43 µm, the pyrometer optris CT P3 is perfectly suited for precise temperature measurements of thin plastic films like PE, PP and PS.
The compact infrared thermometer measures precisely in a temperature range from -20°C to 150°C and is equipped with an intelligent LED display, utilizable as alarm signalization, target support, self-diagnosis or...
The infrared thermometer optris CSlaser G5 HF has been specifically designed for temperature measurement of flat glass, container glass, lightbulbs, vehicle glass, and solar cells.
The pyrometer optris CThot LT has been developed for the most extreme conditions in high-temperature areas and is acclaimed for its especially high temperature resistance. Employment of the inrared thermometer in...
The thermal imager optris PI 640 is the smallest measuring VGA infrared camera worldwide. With an optical resolution of 640x480 pixels, the PI 640 delivers pin-sharp radiometric pictures and videos in real time.
Due to its special spectral region of 7.9 µm, the innovative pyrometer optris CT P7 is perfectly suited for temperature measurements of thin plastic materials like PET, PU, PTFE, PA or CTA.
The small infrared measuring head is perfectly suited for installation in very limited spaces and allows for an especially cost-efficient mechanical process integration.
The infrared thermometer optris CTlaser LT allows for exact temperature measurement on smallest objects from 0,9 mm at a distance of 70 mm. The IR thermometer optris CTlaser LTF is due to its short configuration time...
Due to their short measuring wavelength and the high temperature range of up to 2,200°C the pyrometers optris CT 1M and 2M are ideally suited for employment in high-temperature measurements of metals, metal oxides,...
The infrared thermometer optris CSlaser LT consists of a robust stainless steel sensor with integrated electronics, enabling easy integration into your system.
The small infrared measuring head is optimally suited for installation in limited spaces and subsequently makes possible an especially cost-efficient mechanical process integration.
A full 80x80 thermal image eliminates the hunt for the hot spot and tedious positioning required with single spot temperature sensors. The integrated spot finder function will identify the hottest (or coldest) spot in...
Due to its short measuring wavelength and a temperature range from 50°C on, the pyrometer optris CT 3M, is ideally suited for employment in low-temperature measurements of metals and composite materials. The quick...
The newly developed thermal camera optris PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at...
The infrared thermometer optris CSlaser hs LT allows for measuring of the slightest temperature differences from 0.025°C on, which plays an important role for e.g. continual surveillance of product homogeneities.
Due to its special spectral range of 5.0 µm, the pyrometer optris CT G5 is perfectly suited for the measurement of glass temperatures, e.g. during container glass production, vehicle glass production or solar cell...
The intelligent LED display works optionally as alarm signal, target support, self-diagnosis or temperature-code display. The placement of electronic components within the cable allows for a high temperature...
The Xi 410 is equipped with a motorized focus that enables convenient remote focusing using the free PIX Connect software program. The resolution of the camera is 384 x 240 pixels with a frame rate of 25 Hz.
The infrared thermometer optris CSlaser 2M has been designed specifically for exact temperature measurement of metallic surfaces. Its short measuring wavelength allows not only for precise measurement of metal...
The pyrometer optris CTfast LT is perfectly suited for especially quick measurements ,due to its extremely short response time of 6 ms. The unchoppered sensor allows a continuous temperature surveillance of fast...