The ultrasonic thickness tester can measure material thicknesses up to 300 mm. To ensure that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the ultrasonic thickness tester. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the ultrasonic thickness tester can be used universally.
Individual maximum and minimum values can be stored with the ultrasonic thickness tester's limit value function. If the measured value of the test specimen is outside the limits, the ultrasonic thickness tester signals this visually. If required, the ultrasonic thickness tester can also provide acoustic signalling in addition to the visual display. The ultrasonic thickness tester is therefore used, for example, in quality assurance and incoming goods inspection.
The ultrasonic thickness tester has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the ultrasonic thickness tester. The stored data is displayed graphically by the ultrasonic thickness tester. In addition, each individual measuring point can be approached and read in the graphic of the ultrasonic thickness tester. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the ultrasonic thickness tester. The ultrasonic thickness tester can optionally be equipped with an ISO calibration certificate.
Highlights
| Material thickness | |
| Measuring range | 1 mm ... 99.99 mm |
| Resolution | 0.01 mm |
| Accuracy | ±0.5 % v. Mw. + 0.05 mm |
| Material thickness | |
| Measuring range | 100 mm ... 300 mm |
| Resolution | 0.1 mm |
| Accuracy | ±0.5 % v. Mw. + 0.05 mm |
| Sensor | |
| Designation | PCE-TG 5M10d |
| Frequency | 5 MHz |
| Temperature range | -10 ... 60 °C |
| Measurable materials | Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials |
| Minimum diameter of pipes | 30 mm |
| Additional description | Standard probe for flat materials |
| Dimensions | Ø 10mm x 23.4 mm |
| Weight | 39.5 g |
| Sensor | |
| Designation | PCE-TG 5M6d |
| Measuring range | 1 mm ... 50 mm |
| Frequency | 5 MHz |
| Temperature range | -10 ... 60 °C |
| Measurable materials | Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials |
| Minimum diameter of pipes | 20 mm |
| Additional description | Standard probe for flat materials |
| Dimensions | Ø 6mm x 25.3 mm |
| Weight | 35 g |
| General technical data | |
| Units | mm |
| Display type | TFT colour display |
| Display size | 2.4 inch |
| Storage medium | Internal memory |
| Memory capacity | 1500 values |
| Automatic switch-off from...to | 2 ... 30 min. |
| Automatic switch-off can be deactivated | Yes |
| Sonic speed adjustable | 1000 ... 9999 m/s |
| Menu language | English (US), Chinese |
| Protection class (device) | IP52 |
| Weight | 230 g |
| Dimensions (L x W x H) | 168 x 87 x 35 mm |
| Operating conditions | 0 ... 40 °C , 0 ... 90 % r.H |
| Storage conditions | 0 ... 40 °C , 0 ... 90 % r.H |
| Accumulator/battery | 3x 1.5 V AA battery , alkaline-manganese |
| Capacity | 3000 mAh |
Please sign in first.
Sign inCreate a free account to use wishlists.
Sign in
