Fluke PM6304 and PM6306 series of RCL meters fatures versatile component measurement and testing capability. 

Fluke PM6306

The PM 6306 is the most versatile RCL meter, allowing testing at any frequency up to 1 MHz. AC and DC test voltages are continuously adjustable, and the PM 6306 has a built-in contact check function to ensure optimum connection. With these capabilities, you can handle a wide variety of components under realistic test conditions.

Fluke PM6304

If you want an instrument with remote programmability, consider the Fluke PM 6304 RCL meter. The PM 6304 has a basic accuracy of 0.1%, 3 test voltage levels and 204 test frequencies. The PM 6304C has an even higher basic accuracy, and can measure components or devices with an accuracy of 0.05%. Thanks to this high accuracy, the PM 6304C is idealy suited for calibrating the capacitance sourcing function of the high-performance Fluke 5500A Multi-Product Calibrator.

Features at a Glance:

• Select the test you need
• Easy-to-use, at-a-glance display
• Test frequencies from 50 Hz to 1 MHz (100 kHz for PM 6304)
• 0.1% basic accuracy (0.05% for PM 6304C)
• RS-232 or IEEE-488 interface
• AC test levels from 50 mV to 2V rms
• Internal or external bias
• DC test measurement (optional)
• 9 front panel setups
• Actual component test voltage/current readback
• Automatic zero trimming
• Contact check and deviation mode (PM 6306 only)
• Front-panel test posts for immediate 4-wire measurements