Expand the power of the world's most rugged, accurate handheld test tools with Fluke FVF range of FlukeView® Forms Documenting Softwares.
FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents.
Several versions of the product are available, depending upon the type of cable needed to download data from your instrument and depending upon the data reporting capability you need.
FlukeView Forms Compatibility Chart
FVF Option
Instrument
Cable
Application Level
FVF-UG
Software only upgrade, from FVF Basic to FlukeView Forms plus Designer**
No Cable included
FlukeView Forms plus Designer
FVF-SC1
Fluke 53-II, 54-II, 87-IV*, 89-IV*
Serial / IRDA
FVF-SC2
Fluke 280 Series, 789, 1550B, 1653, 180 Series*
USB / IR
FVF-SC4
Fluke 8808A, 8845A, 8846A, 45*
USB / Serial
FVF-BASIC
Fluke 280 Series, 789, 1550B, 1653, 180 Series*
USB / IR
FVF BASIC
FVF-SC5
Software only**
No Cable included
* Obsolete
** For all instruments listed in table
Using FlukeView® Forms with Multimeters, Thermometers†, MegOhmeters and ProcessMeterTM tools
For the meters in the table below, you can measure and store hundreds of readings to the meter's internal memory, and then later download the information to FlukeView® Forms. For meters that do not have internal memory, such as the Fluke-187, Fluke-789 and the Fluke-45, you can take interactive readings while connected to your PC with FlukeView® Forms.
FlukeView® Forms also logs events to make analyzing your data easier. This unique method of data recording provides more detailed readings when the input signal changes significantly. The amount of signal change that will trigger an event can be adjusted to fit your specific test situation. The minimum, maximum and average of readings are recorded for each event. Logging sessions can also be configured so that data will be recorded over specific intervals (e.g., every 5 minutes or 30 seconds).
Using FlukeView® Forms with Fluke 1653B Installation tester†
Up to 500 test results can be stored in the Fluke 1653B installation tester. The data stored for each measurement consists of the test function, user selectable test conditions and unique references. The results can be uploaded for preparing professional reports. These reports can easily be customized to suit individual requirements as well as compliance with local regulations. Standard formats as well as localized forms for Germany (ZVEH), Austria (ÖVE) and Switzerland (electrosuisse, gem. NIV) are also available
